1
1
2.1 Initializing
After connecting the VLine module to the stereo, an Ignition Cycle will have
to be performed for the stereo to discover Vline and allow Vline to self
configure.
To INITIALIZE:
1. Put Ignition Switch to “ACC” or “ON” position
2. Wait up to 5 Seconds
3. Put Ignition Switch to “OFF” position
4. Wait 1 minute
5. Turn Ignition Switch back to “ACC” or “ON” Position
6. Press the DISC/AUX button until you are able to select the VLINE inter-
face. (may take more than 2 presses of the DISC/AUX for accessing as
first press is for built-in CD/DVD changer in most cases)
CHAPTER 2 — GETTING STARTED
2.2 Functions
The GROM VLINE emulates the factory Auxiliary mode or USB mode of the
stereo depending on vehicle year and model that it is installed into.
No navigation functions of the stereo will be disabled. Factory Blue-
tooth, Navigation, Radio and CD player will remain functional.
Selecting the VLINE mode:
Press the DISC/AUX button to access the
USB
mode of the stereo to enter
into VLINE interface mode (may need to press DISC/AUX few times).
NOTE: Please note factory USB port is disabled when installing VLine.
Buttons
C
ontrols of the VLine Mode
Track selection can be done with the stereo’s Seek Track ^ and v buttons. if
steering wheel controls are available and enabled.
Press the SCAN button twice to activate Voice button.
You may use the Joystick/Knob buttons for some VLINE screen functions.
