using your own or provided USB Android connector cable. If the version of your Android software is 2.3 and older
you will need to have USB Debugging enabled to allow AALinQ to communicate between your Android and the
GROM-USB2P. The USB port will also charge most Android devices (not all supported). If the version of your
Android software is newer than 3.0, you will need to disable USB Debugging function on your phone.
Figure8. Android operation*
*Note:
The
Figure 8
picture is for reference only; different stereos may have different operational buttons.
Please check your manual or contact tech support at
http://gromaudio.com/support.html
•
To enable/disable USB Debugging, on Android device go to Settings Applications Development
•
Once you connect your Android device to GROM-AND2 and the Grom unit is in USB playback mode,
AALinQ should automatically start playing a song from your Android device.
•
Android and USB stick functionality is essentially identical. Playlists on AALinQ will be mapped to discs
on the stereo. Skip tracks, change disc, fast forward, random, scan controls are identical to USB
controls. Text of current song is displayed for stereos that support text for Grom mode.
•
Disc 1 will play all songs on the AALinQ app. Disc 2 or higher are your playlists.
•
If filenames in a certain playlist begin with digits, they will be played in ascending order based on the
order of those digits in the filenames. For example:
\2-kpop\
02. Alive.mp3
01. Blue.mp3 (will play first according to the number )
Rev. 1.2
8