Gro STYLO II, User Manual

Page: 4 / 44

● Keep these instructions for future use.
● Handle the unit with care at all times
● Choose the installation location of your unit carefully. Avoid
placing it in direct sunlight or close to a source of heat. Also
avoid locations subject to vibrations and excessive dust,
heat, cold or moisture.
● Make sure no liquid is spilled on device and device openings.
● The ventilation holes should not be covered. Make sure there
is enough space above and beside the amplifier/receiver.
● Do not place a CD player or other equipment on top of the
Turntable Player/Recorder.
● Do not open or disassemble the cabinet, as this may result
in damage to the circuitry or electrical shock.
● The power cord should be unplugged during long period of
inactivity.
● Do not attempt to clean the unit with chemical solvents
as this might damage the finish. Use a clean, dry cloth.
● The user shall not try to maintain device beyond that
which is described in this information form. The guarantee
would negate.
READ BEFORE OPERATION
● 3-speed turntable fit suitable to play at 33, 45, 78 rpm
● Belt-drive and semi-automatic play tone arm
● Ceramic stereo cartridge with jewel stylus
● Built-in 45 rpm adapter
● 3.5mm headphone socket (front)
● L/R output jack(rear)
● Full range stereo speakers
● Translucent plastic dust cover
● Pitch Control to adjust the Turntable speeds
● DC 9V/1A Adapter
TURNTABLE FEATURES
INSTALLATION AND OPERATION
CAUTION: To avoid stylus damage, make certain the included
stylus guard is in place whenever the turntable is being
installed, moved or cleaned.
1
2
3
1 Stylus Assembly
2 Stylus (Needle)
3 Stylus Guard
3
STYLO_2_all_languages Jan_2018_v3.indd 4 17/12/2017 21:39