Model T32717 (Mfd. Since 07/21)
-11-
SECTION 3: SETUP
Needed for Setup
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box Contents (Figure 4)
Qty
A. Machine (Not Shown) ................................. 1
B. Legs ............................................................ 2
C. Cap Screws M12-1.75 x 35 ......................... 8
D. Flat Washers 12mm ................................. 16
E. Lock Washers 12mm .................................. 8
F. Hex Nuts M12-1.75 ..................................... 8
Figure 4. T32717 inventory.
B
C
D
E
F
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
The following items are needed, but not included,
for the setup/assembly of this machine.
Description Qty
•
Forklift (or Additional People for Lifting) ..... 1
•
Safety Glasses (Per Person) ...............1 Pair
•
Hex Wrench 10mm ..................................... 1
•
Wrench or Socket 18mm ............................ 1
•
Mounting Hardware .................... As Needed
Summary of Contents for T32717
Page 32: ......
