Model T32337 (Mfd. Since 05/22)
-13-
SECTION 3: SETUP
B
C
D
E
F
G
H
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Needed for Setup
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
Figure 6. Inventory.
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
The following items are needed, but not included,
for the setup/assembly of this machine.
Description Qty
•
Safety Glasses ........................................... 1
•
Wrenches or Sockets
9
⁄
16
" .......................... 2
•
Hearing Protection ...................................... 1
Inventory (Figure 6)
Qty
A. Air Compressor (Not Shown) ..................... 1
B. Air Filter Assemblies ................................... 2
C. Shoulder Bolts
3
⁄
8
"-16 x 1
1
⁄
2
" ....................... 2
D. Flat Washers
3
⁄
8
" ......................................... 2
E. Wheels ....................................................... 2
F. Hex Nuts
3
⁄
8
"-16 .......................................... 2
G. Internal Tooth Washers
3
⁄
8
" ......................... 2
H. Flat Washers 13 x 14 x 2mm ...................... 4
Summary of Contents for T32337
Page 40: ......
