manualshive.com logo in svg

Grizzly T32253, Owner'S Manual, Page: 8 / 36

Share
Download
Grizzly T32253 Owner'S Manual Download Page 8

-6-

Model T32253/T32254 (Mfd. Since 08/20)

The information contained herein is deemed accurate as of 9/15/2020 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 2

Model T32253

Spindle

Spindle Speed.......................................................................................................................... 900 - 3600 RPM

Spindle Diameter...................................................................................................................................... 1/2 in.

Spindle Thread Pitch................................................................................................................................ 11 TPI

Spindle Length (Usable)....................................................................................................................... 11/16 in.

Right Spindle Thread Direction.................................................................................................... Right-Handed

Left Spindle Thread Direction......................................................................................................... Left-Handed

Included Spacers.................................................................................................................................... 9/16 in.

Construction

Base..................................................................................................................................................... Cast Iron

Work Rest................................................................................................................................................... Steel

Lamp............................................................................................................................................................ LED

Paint/Finish................................................................................................................................ Powder Coated

Other Specifications:

Country of Origin .............................................................................................................................................. Taiwan

Warranty ........................................................................................................................................................... 1 Year

Serial Number Location ................................................................................................................... Machine ID Label

ISO 9001 Factory .................................................................................................................................................. Yes

Features:

Spindle Speed Digital Readout

Variable-Speed Dial

Adjustable LED Work Light

Cast Iron Base

Summary of Contents for T32253





































Reviews:

No comments