Model T30943/T30944 (Mfd. Since 10/19)
-12
-
The following is a list of items shipped
with your tool. Before beginning setup, lay
these items out and inventory them.
If any non-proprietary parts are missing
(e.g. a nut or a washer), we will gladly
replace them; or for the sake of expediency,
replacements can be obtained at your
local hardware store.
Inventory
Box 1 (Figure 5) Qty
A. Storage Case .....................................1
B. Magnetic Drill .....................................1
C. Weldon
3
⁄
4
" to
1
⁄
2
"-20 Adapter .............1
D. Drill Chuck
1
⁄
16
"–
1
⁄
2
" w/Key ..................1
E. Levers ................................................3
F. Coolant Bottle Assembly ....................1
G. Nylon Strap 5' ....................................1
H. Hex Wrenches 4, 5, 6, 8mm ....... 1 Ea.
I. Replacement Fuses (not shown) .......2
If you cannot find an item on this
list, carefully check around/inside
the tool and packaging materials.
Often, these items get lost in pack-
aging materials while unpacking or
they are pre-installed at the factory.
D
C
B
F
H
E
A
G
Figure 5. Inventory.
