Model T30943/T30944 (Mfd. Since 10/19)
-8
-
Controls &
Components
Refer to
Figures 1–3 and the following
descriptions to become familiar with the
basic controls of this tool.
D. Coolant Valve: Stops/starts flow of
coolant to spindle housing.
E. Spindle/Tool Holder: Accepts bits
with
3
⁄
4
" Weldon shanks.
F. Magnetic Base: When turned ON,
secures tool to ferrous metal surfaces
at least
3
⁄
8
" thick.
A. Spindle Speed Dial: Adjusts spindle
speed. Rotate clockwise to increase
spindle speed, and counterclockwise to
reduce spindle speed.
B. Motor ON/OFF Switch: Press green
ON button (–) to turn motor
ON. Press
red OFF (O) button to turn motor
OFF.
C. Magnet ON/OFF Switch: Toggle to (–)
to turn magnet
ON. Toggle to (O) to
turn magnet
OFF.
Figure 1. Control panel.
A
B
C
G. Spindle Elevation Levers: Moves
spindle vertically along guides.
Figure 3. Location of elevation levers.
G
Figure 2. Operations components.
D
E
F
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
