T28941 Work Stop Measuring System (Mfd. 6/19+)
-3-
7. Insert steel ball into hole at back of carriage
(see
Figure 8) and secure by screwing in
lock handle. Use this handle to position and
lock carriage at different measurements.
Figure 8. Steel ball secured by lock handle.
11. For cuts larger than 8", attach workpiece
guide to workpiece stop by screwing guide
threads into corner hole of stop (see
Figure
11).
8. Set and lock measuring gauge at 0" then line
up push bar mounts at base of carriage (see
Figure 9). Slide push bar through mounts
with workpiece stop positioned on bandsaw
side.
10. Tighten pre-installed hardware in bar mounts.
Figure 10. Push bar aligned with workpiece
cutting point.
Work Stop
Bandsaw
Blade
9. Align workpiece stop with workpiece where it
will contact bandsaw blade (see
Figure 10).
Carriage
Steel Ball
(hidden)
Lock Handle
Figure 11. Workpiece guide and stop. (Other
assembled parts removed for clarity).
Guide
Stop
Push Bar
Mounts
Figure 9. Push bar and mounts.
