manualshive.com logo in svg

Grizzly T28522, Owner'S Manual

Share
Download
Grizzly T28522 Owner'S Manual Download Page 11

Model T28522 (Mfd. Since 09/18)

-9-

SECTION 2: SETUP

Description Qty
• 

Additional Person ....................................... 1

• 

Safety Glasses (each person) .................... 1

• 

Leather Work Gloves (each person) ....1 Pair

• 

Solvent/Cleaner (

Page 11) ......... As Needed

• 

Shop Rags .................................. As Needed

• 

Mounting Hardware (

Page 13) ... As Needed

Needed for Setup

This  machine  was  carefully  packaged  for  safe 
transport. When unpacking, separate all enclosed 
items from packaging materials and inspect them 
for  shipping  damage. 

If  items are damaged, 

please call us immediately at (570) 546-9663. 

IMPORTANT:  Save  all  packaging  materials  until 
you are completely satisfied with the machine and 
have resolved any issues between Grizzly or the 
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely 
helpful if you need to return your machine later.

Unpacking

SUFFOCATION HAZARD!

Keep children and pets away 

from plastic bags or packing 

materials shipped with this 

machine.

This machine presents 

serious injury hazards 

to untrained users. Read 

through this entire manu-

al to become familiar with 

the controls and opera-

tions before starting the 

machine!

The following items are needed, but not included,  
for the setup/assembly of this machine.

Lifting heavy machinery or 

parts without proper assis-

tance or equipment may 

result in strains, back inju-

ries, crushing injuries, or 

property damage.

Wear safety glasses and leather work gloves 
during the entire setup process!

Summary of Contents for T28522

































Reviews:

No comments

Brands by name

Popular brands

Load more brands