Grizzly T27665, Instructions Manual, Page: 2 / 8

-2-
T27665 (Mfd. 01/16)
Small Item Inventory
Description Qty
A. Hex Wrench 6mm ....................................... 1
B. Hex Wrench 8mm ....................................... 1
C. Open-End Wrench 17/19mm ...................... 1
Cleanup
The unpainted surfaces of your machine are
coated with a heavy-duty rust preventative that
prevents corrosion during shipment and storage.
This rust preventative works extremely well, but it
will take a little time to clean.
Be patient and do a thorough job cleaning your
machine. The time you spend doing this now will
give you a better appreciation for the proper care
of your machine's unpainted surfaces.
There are many ways to remove this rust preven-
tative, but the following steps work well in a wide
variety of situations. Always follow the manufac-
turer’s instructions with any cleaning product you
use and make sure you work in a well-ventilated
area to minimize exposure to toxic fumes.
Before cleaning, gather the following:
•
Disposable Rags
• Cleaner/degreaser (WD•40 works well)
• Safety glasses & disposable gloves
• Plastic paint scraper (optional)
Basic steps for removing rust preventative:
1. Put on safety glasses.
2. Coat rust preventative with a liberal amount
of cleaner/degreaser (see
Page 7 for offer-
ings from Grizzly), then let it soak for 5–10
minutes.
3. Wipe off surfaces. If your cleaner/degreaser
is effective, rust preventative will wipe off
easily. If you have a plastic paint scraper,
scrape off as much as you can first, then wipe
off the rest with a rag.
4. Repeat Steps 2–3 as necessary until clean,
then coat all unpainted surfaces with a quality
metal protectant to prevent rust.
NOTICE
Avoid chlorine-based solvents, such as
acetone or brake parts cleaner, that may
damage painted surfaces.
Figure 2. Small item inventory.
A
B
C
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting the arbor press. To
reduce this risk, get help
from other people or lifting
equipment rated for weight
of the arbor press.