Grizzly T27305, Owner'S Manual, Page: 15 / 36

Model T27305 (Mfd. Since 02/16)
-13-
Assembly
The Model T27305 comes mostly assembled
from the factory. Using the hardware from the
Inventory list on Page 11, complete the assembly
by attaching the tool rest and safety shield.
To assemble grinder:
1. Assemble safety shields using (4) M4-.7 x 12
Phillips head screws, (4) M4-.7 flange nuts,
(2) safety shield clamping plates, (2) safety
shields, and (2) safety shield mounting brack-
ets (see
Figure 8).
2. Attach safety shield assemblies to spark
deflectors using (2) M6-1 x 12 carriage bolts,
(2) 6mm flat washers, (2) 6mm lock washers,
and (2) M6-1 knobs (see
Figure 9).
Figure 8. Safety shield assembly (1 of 2).
Safety Shield
Clamping Plate
Safety
Shield
Safety Shield
Mounting Bracket
Flange
Nuts
Phillips
Head Screws
Figure 9. Safety shield attached to spark
deflectors (1 of 2).
Safety Shield
Assembly
Spark
Deflector
Carriage
Bolt
Flat
Washer
Knob
Lock
Washer
Figure 11. Example tool rest assembly (left).
Tool Rest
Tool Rest
Bracket
Knob
Bolt
Flat
Washer
4. Assemble left tool rest using (1) left tool rest
bracket, (1) left tool rest, (1) 6mm flat washer,
and (1) M6-1 x 18 knob bolt (see
Figure 11).
5. Assemble right tool rest using (1) right tool
rest bracket, (1) right tool rest, (1) 6mm flat
washer, and (1) M6-1 x 18 knob bolt (see
Figure 11).
3. Then attach spark deflector/safety shield
assemblies to grinder with (4) M5-.8 x 10 Phillips
head screws with washers (see
Figure 10).
Figure 10. Spark deflector and safety shield
attached to grinder.
Phillips Head
Screws