For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]
MODEL T25862
OPEN STAND FOR
MODEL G1183/G1276
INSTRUCTIONS
COPYRIGHT © APRIL, 2014 BY GRIZZLY INDUSTRIAL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL16519 PRINTED IN TAIWAN
Introduction
The Model T25862 Open Stand is designed to be
used with the Model G1183 and G1276 Heavy-
Duty Combination Sanders.
Description Qty
A. Phillips Head Screwdriver #2 ..................... 1
B. Wrench or Socket 10, 14, 17mm ..........1 Ea.
Tools Needed for Assembly
Description Qty
A. Stand Legs ................................................. 4
B. Short Cross Braces .................................... 2
C. Long Cross Braces ..................................... 2
D. Stand Top ................................................... 1
E. Rubber Feet ............................................... 4
F. Hardware Bag (Not Shown) ........................ 1
—Hex Bolts
3
⁄
8
"-16 x 4" .............................. 4
—Hex Nuts
3
⁄
8
"-16....................................... 4
—Flat Washers
3
⁄
8
" ..................................... 8
—Flange Screws
1
⁄
4
"-20 x
1
⁄
2
" ................... 40
—Phillips Head Screws
1
⁄
4
"-20 x 1" ............ 4
—Hex Nuts
1
⁄
4
"-20 .................................... 44
—Flat Washers
1
⁄
4
"-20 .............................. 44
Inventory
A
B
C
D
E
Assembly
We recommend assembling the stand upside
down. After the stand is assembled, two strong
people are required to lift the G1183/G1276 onto
the stand and hold it in place until firmly secured
to the stand.
1. Place stand top upside down on a flat sur-
face.
2. Secure legs to top with (24)
1
⁄
4
"-20 x
1
⁄
2
" flange
screws, (24)
1
⁄
4
" flat washers, and (24)
1
⁄
4
"-20
hex nuts. Only hand-tighten stand fasteners
for this step.
Top
Leg
x 24
Summary of Contents for T25862
Page 4: ......
