T23120 Steel Folding Cart
-3-
Assembly
The Model T23120 requires assembly. Before
starting, place a sheet of cardboard or other pro-
tective material on the floor to reduce the likeli-
hood of damaging the finish during assembly.
During the following steps, unless instructed
otherwise, avoid fully tightening the hardware to
allow the components to move freely.
To assemble the cart:
1. Connect the left side panel to the main frame
with (2) M8-1.25 x 70 hex bolts, (4) 8mm
flat washers, and (2) M8-1.25 lock nuts, as
shown in
Figure 5.
2. Repeat Step 1 for the right side panel.
3. attach the top shelf tabs to the left and right
sides with (2) M8-1.25 x 40 hex bolts, (4)
8mm flat washers, and (2) M8-1.25 lock nuts,
as shown in
Figure 6.
4. attach the bottom shelf to the main frame
with (2) M8-1.25 x 60 hex bolts, (4) 8mm
flat washers, and (2) M8-1.25 lock nuts, as
shown in
Figure 7.
5. attach the top shelf to the main frame with (2)
M8-1.25 x 50 hex bolts, (4) 8mm flat wash-
ers, and (2) M8-1.25 lock nuts, as shown in
Figure 8.
Figure 5.
Side panel attached.
Left Side Panel
Main Frame
x2
Figure 6.
Top shelf tab attached.
Top Shelf Tab
Left Side Panel
Figure 7.
Bottom shelf attached.
x2
Bottom Shelf
Main Frame
Figure 8.
Top shelf attached.
x2
Main Frame
Top Shelf
x2
