Model T23092 (Mfd. Since 04/11)
-4
-
Identification
Become familiar with the names and locations of the controls and features shown below to
better understand the instructions in this manual.
A. Fluid Control: Controls volume of
material that travels through fluid noz-
zle and past atomizer cap.
B. Pattern Control: Adjusts spray output
between round pattern and wide fan.
C. Storage Hook: Allows spray gun to be
temporarily stored in a vertical position
to avoid material spills.
D. Atomizing Cap: Atomizes material as
it is sprayed from nozzle. Adjusts for
horizontal or vertical spray patterns.
E. Fluid Nozzle: Sprays material past
atomizer cap.
F. Vacuum Relief Hose: Allows air to
flow into fluid cup as needed to prevent
vacuum buildup.
G. Fluid Cup Lock Lever: Releases/
engages pressure between cup hooks
and pins.
H. Cup Hook & Pin: Secures lid assem-
bly to cup when pressure is applied by
lock lever.
I. Fluid Cup: Holds material to be sprayed.
J. Two-Stage Trigger: Stage one releas-
es compressed air for blowing off
workpiece. Stage two sprays material.
Lightly squeeze trigger for stage one;
squeeze trigger all the way to spray
material.
K. Air Inlet:
1
⁄
4
" NPT connection for com-
pressed air hose.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Figure 1. Model T23092 identification and controls.
B
A
J
F
K
C
D
E
G
I
H
Summary of Contents for T23092
Page 20: ......
