Model T1248/T1249 (Mfd. Since 11/17)
-3-
6. Thread (4) rubber feet into bottoms of end
frames (see
Figure 7).
7. Turn workbench upright and make sure it is
centered over end frames and supports (not
leaning to one side or the other), then fully
tighten all fasteners.
8. Adjust feet as necessary to ensure work-
bench sits firmly on ground and does not
rock.
Option: Lay a level across workbench from
side-to-side and end-to-end when adjusting
feet.
Figure 8. Steel bars inserted.
End Support
Frame
Steel
Bars
Figure 7. Adjustable feet attached.
End Frame
Rubber
Foot
9. Insert steel bars through end support frames
as desired (see
Figure 8).
Note:
End frames have several
holes, allowing for numerous shelving and
racking configurations.
Summary of Contents for T1248
Page 6: ......
