Model T1243 (Mfd. Since 02/18)
-7-
Assembly
The T1243 Cross-Slide Rotary Table comes fully
assembled except for the handwheel handles.
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
2. Thread (1) fixed handle 38mm and (1)
fixed handle 58mm into X-axis and Y-axis
handwheels (see
Figure 4). Hand tighten.
Figure 3. Installing shoulder screw and handle
without shaft into rotary table handwheel.
Items Needed
Qty
Flat Head Screwdriver #2 .................................. 1
To assemble machine:
1. Insert shoulder screw into handwheel handle,
then attach shoulder screw to 3" rotary table
handwheel as shown in
Figure 3.
Figure 4. Fixed handles installed on X- and
Y-axis handwheels.
X-Axis
Handwheel
Y-Axis
Handwheel
Fixed
Handle 38mm
Fixed
Handle 58mm