Grizzly T1240, Owner'S Manual, Page: 14 / 32

-12-
Model T1240 (Mfd. Since 12/17)
3. Re-attach fence assembly to table with (2)
M6-1 x 15 knob bolts and (2) 6mm flat
washers from
Step 1 (see Figure 8).
Figure 9. Hold-down brackets attached.
Hold-Down
Brackets
6. Attach (2) hold-downs to hold-down brackets
with (2) M5-.8 x 12 knob bolts and (2) 5mm
flat washers (see
Figure 10).
Figure 10. Hold-downs attached.
Knob
Bolts
Hold-
Downs
Figure 8. Fence assembly attached.
Fence
Base
Figure 7. Legs attached.
x 4
2. Attach table legs to table with (4)
M8-1.25 x 50 flat head screws, (4) 8mm
flat washers, and (4) M8-1.25 hex nuts
(see
Figure 7).
4. Remove and set aside (2) M6-1 wing nuts
and (2) 6mm flat washers used to attach
fence boards to fence base (see
Figure 9).
5. Attach (2) hold-down brackets to
fence assembly with (2) M6-1 wing nuts
and (2) 6mm flat washers from
Step 4
(see Figure 9).
x 2
x 2