t10493, t10494 & t10495 (Mfg since 10/11)
-13
-
section 6: maintenance
eye inJury hazard!
Wear safety goggles with full eye
protection from all sides when
using or servicing this grinder.
regular maintenance
these procedures should be done
before and after each use:
•
Check the wheel before each use to
ensure no cracks and chips are present,
and that wheel size is sufficient to
safely grind.
Note:
To avoid property damage,
the size of the wheel should be
large enough to prevent the outer
flange from coming into contact with
the workpiece in a typical grind-
ing operation.
•
outer flange is tight and wheel is
secure.
•
handle and guard are in proper position
and firmly attached to the grinder.
•
For Models t10494 and t10495,
ensure that the trigger safety button is
in proper working condition.
•
For Model t10493, ensure that on/
oFF locking slide switch is in proper
working condition.
accidental
start hazard!
disconnect power
before service or
wheel changes.
Wheel shatter
hazard!
never exceed rpm
rating for wheels.
lung/ear
inJury hazard!
Wear protective
equipment when
using this tool.