-2-
T10264-68, T10274-75 hand Planes
Accessories
Replacement Blades for Grizzly Hand Planes
Model T23169 for Model T10264
Model T23173 for Model T10268
Model T23177 for Model T10274
Model T23178 for Model T10275
Operation
1. secure the workpiece to prevent it from mov-
ing.
2. Position the sole on the workpiece, being
mindful of the grain orientation and stroke
type (push or pull) you plan to make.
3. set the blade depth to remove a minimal
amount of material, make a few cuts, then
adjust the blade based on your results.
Figure 2. g1482 honing guide.
g1482—Honing guide
accurate bevels are easily achieved using this
honing guide. Very easy to use and a must for
any chisel owner. It can also be used for plane
irons up to 2
5
⁄
8
" wide and chisels up to 1
5
⁄
8
" wide. If
you've tried sharpening blades by hand then you
know that this is one tool you must have!
Maintenance
•
sharpen the blade bevel when it becomes
noticeably difficult to push or pull the plane, or
when it produces excessive chatter. To learn
how to sharpen the blade, refer to books,
magazines, or additional resources on the
internet.
•
Before storing the plane, remove the blade,
wipe it down with an oily cloth, and store it in
a dry place to prevent rusting.
•
store the plane in a place where it is not
exposed to direct sunlight or extremely dry or
wet air.
If you need help with your plane, call our Tech
Support at: (570) 546-9663.
Troubleshooting
•
If the tool chatters, reduce the depth of cut, or
try skewing the blade angle.
•
If the throat clogs with shavings, reduce the
depth of cut, or clear larger shavings after
each stroke is complete.
•
If one side of the blade digs into the work-
piece more than the other, adjust the blade
so it is parallel to the sole.
Figure 3. h2927 3-Pc. diamond Whetstone set.
H2927—3 Pc. Diamond Whetstone Set
Includes extra fine, fine, and coarse grades. Quick,
easy and effortless sharpening. no oil lubrication
needed. Only requires water. Extremely durable.
Japanese Waterstones
To achieve a surgically sharp edge on your tools,
nothing works faster or better than Japanese
water stones. The abrasive slurry produced on
top of the stone cuts aggressively and polishes
the blade as it sharpens.
g3920—Stone Holder
rubber body keeps sharpening stones from slid-
ing around the benchtop during honing. adjusts
from 5
1
⁄
2
" to 9". stone not included.
g3295: 8
1
⁄
8
" l x 2
1
⁄
2
" W x 1
3
⁄
8
" T, grit: 800
g3296: 8
1
⁄
8
" l x 2
1
⁄
2
" W x 1
3
⁄
8
" T, grit: 1000
g3297: 8
1
⁄
8
" l x 2
1
⁄
2
" W x 1
3
⁄
8
" T, grit: 1200
g3298: 8
1
⁄
8
" l x 2
7
⁄
8
" W x
7
⁄
8
" T, grit: 6000
