-2-
T10051 14" portable Benchtop Brake
Inventory (Figure 2)
A. Bench Shear (not shown) .......................... 1
B. Safety guard .............................................. 1
C. Work Stop Assembly .................................. 1
D. handle ........................................................ 1
E. hex Wrenches 2.5, 4mm ......................1 ea.
Assembly
1. Attach the safety guard by removing the pre-
installed phillips head screws from the tool
base, aligning the guard over the holes in the
base, then securing it with the just-removed
phillips head screws (
Figure 3).
2. Attach the handle by removing the pre-
installed hex bolts, flat washers, and lock
nuts, aligning the holes in the handle with
those in the handle base, then securing it with
the just-removed hex bolts, flat washers, and
lock nuts (
Figure 4).
3. Attach the work stop assembly by threading
it into one of the three threaded holes on the
side of the tool base (
Figure 5).
Note: This step is optional and only neces-
sary when you plan to use the work stop. The
mounting location of the work stop depends
on the size of your workpiece and the opera-
tion you are performing.
Figure 2
.
inventory.
B
C
d
e
Figure 3.
Safety guard attachment.
guard
Tool Base
phillips head
Screws
Figure 4.
Handle attachment.
handle Base
handle
Figure 5.
Work stop attachment.
Tool Base
Work Stop
Assembly
Mounting hole
(1 of 3)