background image

Model H8222 Spray Gun

-2

-

6.  USE  CORRECT  AIR  PRESSURE. 

Exceeding  the  maximum  PSI  rating 
of this spray gun may cause unpre-
dictable operation or bursting.

7.  DISCONNECT  AIR  PRESSURE

 

before servicing, changing accesso-
ries,  or  moving  to  another  location. 
Never  leave  this  spray  gun  unat-
tended when connected to air.

8.   AVOID  IGNITION  SOURCES

Spraying  around  ignition  sources 
may  cause  fire  or  an  explosion. 
Do  not  spray  around  any  ignition 
sources or potential ignition sources. 
Be  aware  of  appliances  that  have 
pilot  lights  or  machinery  that  cre-
ates sparks during operation. Do not 
smoke in the spraying area or when 
spraying.

9.  FIRE  EXTINGUISHERS.

  Always 

have  a  fully  charged  multi-class 
or  class  B  fire  extinguisher  in  the 
immediate area.

10.  AVOID 

UNINTENTIONAL 

OPERATION.

 Always disconnect air 

when  not  in  use,  and  do  not  carry 
tool with hand on trigger.

11.  KEEP  CHILDREN  AWAY.

  Prevent 

children  from  injury  by  keeping 
them  away  from  this  spray  gun. 
Disconnect  and  lock  the  spray  gun 
away when not in use.

12.  AVOID USE WHEN TIRED OR ON 

DRUGS OR ALCOHOL. 

Avoid using 

this spray gun if you are overly tired 
or  intoxicated.  Using  this  spray  gun 
during these times may increase the 
risk of injury or fire.

13.  UNTRAINED  &  UNSUPERVISED 

USE. 

Untrained  operators  are  not 

aware  of  the  safe  use  of  this  spray 
gun  and  may  injure  themselves  or 
cause  fire.  All  untrained  operators 
must  be  directly  supervised  at  all 
times if using this spray gun.

14.

 

READ 

MATERIAL 

LABELS 

and  MATERIAL  SAFETY  DATA 
SHEETS  (MSDS).

  Read  and  know 

all the instructions on the packaging 
label and the MSDS before opening 
the package. This information could 
save your life.

15.

 

PROTECTIVE  CLOTHING. 

Protect 

exposed  skin  from  overspray  by 
wearing  a  protective  suit  or  other 
approved garment.

16.

 

INAPPROPRIATE  USE.

  DO  NOT 

point  or  shoot  spray  gun  directly 
at  yourself  or  another  person  or 
animals.  Do  not  attempt  to  use  the 
spray  gun  for  any  other  use  than  it 
was intended.

17.

 

STORAGE. 

Thoroughly  clean  and 

dry spray gun before storage. Store 
in an approved cabinet.

18.  BE AWARE OF HOSE LOCATION.

 

Hoses can easily become a tripping 
hazard when laid across the floor in 
a disorganized fashion.

19.

 

SOLVENTS. 

Always  store  solvents 

and shop towels soaked in solvent in 
approved containers.

20. LOCAL  LAWS. 

Consult  local 

authorities  regarding  exhaust  and 
waste disposal requirements.

Summary of Contents for Model H8222

















Reviews: