-4-
Model G0642 (Mfd. Since 11/14)
Basic Controls
Refer to
Figure 2 and the following descriptions
to become familiar with the basic controls of this
machine.
A. Workpiece Hold-Down: Secures the
workpiece firmly against the table and fence.
Adjusts to accommodate different workpiece
thicknesses.
B. Fence Extension and Scale: Mounts on
the left end of the table fence for longer
workpieces.
C. Fence Locking Lever and Stops: Mount
anywhere along the fence so holes can be
drilled in multiple workpieces at the same
location.
D. Drilling Depth Control: Sets the maximum
boring bit depth.
E. Downfeed Handle: Raises and lowers bor-
ing bits for drilling operations.
F. ON/OFF Switch: Starts and stops motor.
G. Throat Position Lock: Locks the boring
head lateral position when adjusting the set-
back distance.
H. Indexing Pin: Positions the workpiece for
additional drilling beyond 15 holes.
I. Throat Adjustment Knob: Adjusts the bor-
ing head bit position laterally.
J. Table Fence and Scale: The fence sup-
ports the workpiece during the boring opera-
tion. The fence scale is used to position the
workpiece relative to the boring bits.
A
G
C
F
E
I
H
Figure 2. Model G0642 basic controls.
J
B
D
No list of safety guidelines can be complete.
Every shop environment is different. Always
consider safety first, as it applies to your
individual working conditions. Use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machinery there is potential danger
when operating this machine. Accidents are
frequently caused by lack of familiarity or
failure to pay attention. Use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety pre-
cautions are overlooked or ignored, serious
personal injury may occur.
Summary of Contents for Line Boring Machine G0642
Page 44: ... 42 Model G0642 Mfd Since 11 14 ...
Page 48: ......
