background image

H7817 2000 lb. Electric Winch

-1

-

Safety Instructions for Electric Winches

1.  READ  THIS  MANUAL:

  This  manual 

contains proper operating instructions 
for this machine.

2.  EYE  PROTECTION:

  Always  wear 

ANSI  approved  eye  protection  when 
operating winch.

3.  LOOSE  CLOTHING:

  DO  NOT  wear 

loose  clothing  while  operating  this 
machine.  Keep  hair,  jewelry  and 
hands away from operating winch. 

4.  CABLE  DAMAGE:

  Always  inspect 

any  slings  or  pins  and  the  cable  for 
frays, loose connections, or damage. 
DO NOT use winch if any component 
is  damaged  or  if  the  cable  is  dam-
aged or frayed in any way.

5.  CABLE  REPLACEMENT:

  DO  NOT 

replace  the  cable  with  one  of  lesser 
strength.  A  cable  of  lesser  strength 
could  snap  and  whip  back,  causing 
serious personal injury.

6.  CABLE BREAKAGE:

 DO NOT stand 

in  line  with  or  alongside  the  cable 
while  the  winch  is  operating.  If  the 
cable  breaks  it  can  whip  back  and 
cause serious personal injury.

7.  WINCH LIMITS:

 DO NOT attempt to 

exceed the pulling limits of the winch. 
Always leave a minimum of five turns 

(1/2 wrap) of cable on the winch at all 
times. 

8.  SAFETY  SPOTTER:

  Use  a  spotter 

to help ensure safety when using the 
winch.  Be  sure  the  spotter  is  out  of 
the way of the vehicle and the cable 
before operating the winch.

9.  HAND  ASSISTANCE:

  NEVER 

attempt  to  assist  the  winch  by  pull-
ing  on  the  cable  while  the  winch  is 
running. This can cause serious per-
sonal injury.

10.  AUTOMOTIVE  BATTERY:

  Be  sure 

the  battery  is  in  good  condition. 
Always connect the positive (+/RED) 
cable to the positive (+/RED) battery 
post first, and then connect the nega-
tive  (-/BLACK)  cable  to  the  vehicle 
frame.

11.  CABLE  PROTECTION:

  Always  pro-

tect  the  cable  and  any  slings  from 
sharp  edges.  DO  NOT  stress  the 
cable  or  slings  by  using  them  on 
extreme pulling angles.

12.  VEHICLE SAFETY:

 NEVER acceler-

ate or reverse the winching vehicle in 
order to assist in winching operations. 
This  can  cause  the  winch  or  cable 
to  fail  and  cause  serious  personal 
injury.

Summary of Contents for H7817













Reviews: