-2-
Model H7509Z (Mfd. Since 01/21)
SECTION 1: SETUP
Unpacking
This cyclone dust collector stand was carefully
packaged for safe transport. When unpacking,
separate all enclosed items from packaging mate-
rials and inspect them for shipping damage.
If
items are damaged, please call us immedi-
ately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the stand and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your stand later.
Anchoring to Floor
Figure 1. Popular method for anchoring
machinery to a concrete floor.
Anchoring to Concrete Floors
Number of Mounting Holes ............................ 4
Diameter of Mounting Hardware .................
1
⁄
2
"
Anchoring machinery to the floor prevents tipping
or shifting and reduces vibration that may occur
during operation, resulting in a machine that runs
slightly quieter and feels more solid.
If the stand and machine will be installed in
a commercial or workplace setting, or if the
machine is permanently connected (hardwired) to
the power supply, local codes may require that it
be anchored to the floor.
If not required by any local codes, fastening the
stand to the floor is an optional step. If you choose
not to do this, we recommend placing your stand
on machine mounts, as these provide an easy
method for leveling and they have vibration-
absorbing pads.
Lag shield anchors with lag screws (see below)
are a popular way to anchor machinery to a con-
crete floor, because the anchors sit flush with the
floor surface, making it easy to unbolt and move
the stand and machine later, if needed. However,
anytime local codes apply, you MUST follow the
anchoring methodology specified by the code.
Stand or Machine Base
Concrete
Lag Screw
Lag Shield Anchor
Flat Washer
Drilled Hole
Needed for Setup
The following items are needed, but not included,
for the setup/assembly of this stand.
Description Qty
•
Model G0441 (Mfd. 09.20+). ....................... 1
•
Additional People ....................................... 1
•
Lifting Equipment ........................................ 1
•
Safety Glasses (For Each Person) ............. 1
•
Wrench or Socket
1
/
2
" ................................. 2
•
90° Square ................................................. 1
•
Scrap Cardboard ........................ As Needed
•
Wrench or Socket
9
/
16
" ................................ 2
•
Phillips Head Screwdriver #2 ..................... 1
•
Wrench or Socket 8mm .............................. 1
•
Open-Ended Wrench 30mm ...................... 1
Aside from the information in this manual, all other
content in the Model G0441 owner's manual and
manual update applies and MUST be read and
understood for your own safety.
IMPORTANT:
Keep this manual with the G0441 owner's
manual for future reference.
For questions or help, contact our Tech Support
at (570) 546-9663 or [email protected].
Summary of Contents for H7509Z
Page 16: ......
