H6146 34° Clipped Head Framing Nailer
-5
-
SET UP
Unpacking
Inventory
After you open the nailer box, you should
find the following.
Model H6146 Inventory (Figure 1)
A. 34° Clippled Head Framing Nailer ..... 1
B. Safety Goggles ................................. 1
C. Oil ....................................................... 1
D. Hex Wrench 3mm .............................. 1
E. Hex Wrench 4mm .............................. 1
F. Hex Wrench 5mm .............................. 1
G. Hex Wrench 6mm .............................. 1
Figure 1. Model H6146 inventory.
B
C
D
G
F
E
A
Your machine was carefully packaged for
safe transportation. Remove the packag-
ing materials from around your machine
and inspect it. If you discover the machine
is damaged, please immediately call
Customer Service at (570) 546-9663 for
advice.
Save the containers and all packing mate-
rials for possible inspection by the carrier
or its agent. Otherwise, filing a freight
claim can be difficult.
When you are completely satisfied with
the condition of your shipment, inventory
the contents.
If any non-proprietary parts are missing
(e.g., a nut or a washer), we will gladly
replace them; or for the sake of expedien-
cy, replacements can be obtained at your
local hardware store.