Grizzly H3119, Instruction Manual

Page: 7 / 16

H3119 Electric 3 ⁄
16
" Crown Stapler -5
-
Clearing Jammed Staples
Staple jams are an inevitable part of oper-
ating any stapler.
To clear a jammed stapler:
1. Unplug the tool from the power
source!
2. Open the staple magazine and remove
all un-jammed staples.
3. The jammed staple may be easily
removed at this time; otherwise, the
stapler tip will need to be disassem-
bled
.
4. To disassemble the tip, use an allen
wrench to remove the three allen head
cap screws from the face of the tip.
5. Once the screws are removed and the
staple magazine is open, the tip piece
should pull away from the stapler.
6. The jammed staple should now be
easy to remove.
7. Once the jammed staple is removed,
re-assemble the stapler.
Maintenance
Unplug the stapler from the power
source before performing any mainte-
nance!
Cleaning The Stapler
While wearing safety glasses, periodically
clean the stapler with compressed air. DO
NOT use flammable products to clean the
stapler.
Gasoline or petroleum products used
to clean the tool could explode caus-
ing serious personal injury. DO NOT
use gasoline or petroleum products
to clean the tool.