Grizzly H3118, Owner'S Manual

Page: 13 / 26

H3118 Tile Saw
-11-
Assembly
Figure 4. Attaching the rubber feet
The Model H3118 comes pre-assembled from the
factory except for the blade guard and the four
rubber feet that need to be inserted into the base,
as shown in
Figure 4
. Dip the rubber feet into
soapy water to ease the installation.
Note: Do not twist the feet during installation.
They could break. Use only a wiggling action.
To attach the blade guard, loosen the knob on
the blade guard assembly. Mount the blade guard
to the riving knife behind the saw blade and re-
tighten the knob, as shown in
Figure 5 .
Figure 5.
Mounting the blade guard to the riving
knife.
Blade Guard
Riving Knife