Grizzly H2867, Instruction Manual, Page: 7 / 12

H2867 Electric Shear
-5
-
Operation
If you are cutting a large dimension of
sheet metal, use a large flat working sur-
face such as a workbench to support the
work as shown in Figure 3 . Once the cut
lines have been determined, turn the
shears ON and begin the cut.
If you need to trim small pieces of sheet
metal, use the shear in a stationary posi-
tion while pulling the metal through the
shears, towards your body as shown in
Figure 4 . Avoid letting your fingers get to
close to the moving jaws.
If everything is in proper adjustment and
working order, there should be a spiral trail
of sheet metal exiting the shear as you
make your cut.
Figure 3. Cutting large stock.
Figure 4. Cutting small stock.