Grizzly GP 4645, Instructions For Use Manual

Page: 19 / 44

19
GB
- Do not use the suction hose as
a pressure pipeline.
1. Remove the cover caps (1/3)
from the device.
2. Attach the prefilter with reflow
stopper (15) to the connector
prefilter (16) at the suction hose
(14). Both piecese marked with
a B .
3. Attach the adapter (11) to the
water inlet (2) . Both pieces
marked with an A .
4. Attach the suction hose connec-
tion water inlet (13) with the seal
ring (12) to the adaptor (11).
Both pieces marked with an A
. Fit the water inlet free from air.
5. Fit a pressure hose to the water
outlet (4) Fit the water outlet
free from air.
Air in the suction hose will stop the
garden pump from working prop-
erly.
Filling the pump
Fill up the garden pump every time before
you start using it. This will ensure an im-
mediate start. Running dry will destroy the
pump.
1. Open the filling screw ( 9) on the
garden pump.
2. Fill with water to the fill point and
retighten the filling screw ( 9) .
Checks before initional
operation
• Check that the electrical con-
nection is 230V ~50Hz
• Check the proper status of the
electrical plug socket and make
sure that the plug socket is suf-
ficiently fused (at least 10 A).
• Make sure that moisture or wa-
ter never come in contact with
the mains connection.
There is a risk of electrocution.
• Control the suction hose. The
end of the suction hose must be
placed in water.
• Control the suction hose. The
end of the suction hose must be
in outlet position.
The device is not suitable to be
connected to a drinking water sup-
ply system.
Switching ON and OFF
1. Connect the power cable ( 6) to the
power supply.
2. Switching On:
On/Off Switch ( 5 ) In position “ I “
After a suction period the pump be-
gins the supply of water.
3. Switching Off:
On/Off Switch ( 5 ) In position “ 0 ”
Overload protection: In the event
of overload the equipment auto-
matically switches off. To restart,
allow the equipment to cool then
switch it back on.