Introduction
The Model G8748 provides excellent alignment,
control, and rigidity when tapping holes. As a
result, tapping will be much easier and you will
have fewer broken taps.
Inventory
A. Fixed Jaw ................................................... 1
B. Lever .......................................................... 1
C. Spindle ....................................................... 1
D. Handle Assembly ....................................... 1
E. L-Frame ...................................................... 1
F. Movable Jaw .............................................. 1
G. Counterbalance .......................................... 1
H. Base ........................................................... 1
I. Adapter Rack .............................................. 1
—Adapter #6 .............................................. 1
—Adapter #8 .............................................. 1
—Adapter #10 ............................................ 1
—Adapter
1
⁄
4
" .............................................. 1
—Adapter
5
⁄
16
" ............................................. 1
—Adapter
3
⁄
8
" .............................................. 1
—Adapter
7
⁄
16
" ............................................. 1
—Adapter
1
⁄
2
" .............................................. 1
—Adapter
5
⁄
8
" .............................................. 1
J. Hardware
—Knurled Knob .......................................... 1
—Cap Screws M10-1.5 x 35 ...................... 4
—Collar ...................................................... 1
—Phillips Head Screws M5-.8 x 40 ............ 2
—Thumbscrew ........................................... 1
—Dowel Pin 4 x 30mm .............................. 1
—Taper Pin ................................................ 1
Cleaning
Remove shipping grease from all coated parts
with a mild solvent or degreaser, then re-coat
them with a light layer of oil to prevent rust.
MODEL G8748
HAND TAPPING MACHINE
INSTRUCTIONS
Figure 1.
Model G8748 Hand Tapping Machine.
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
COPYRIGHT © APRIL, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR9245 PRINTED IN CHINA
Figure 2.
Model G8748 inventory.
A
B
C
D
E
F
G
H
I
J
Lubrication
After assembly, lubricate the grease fitting on the
side of the L-frame with multi-purpose grease,
then re-lubricate often to minimize wear and ease
operation.
