-14-
Model G4181/G7873 (Mfd. Since 12/13)
Box Inventory (Figures 4 & 5)
Qty
A. Power Feeder Assembly ............................ 1
B. Lubricator.................................................... 1
C. Base and Column Assembly ...................... 1
D. Elbow Joint Assembly ................................ 1
E. Base Bolt Pattern Template ........................ 1
F. Handcrank Handle ..................................... 1
G. Horizontal Column Assembly ..................... 1
Figure 5. Base inventory.
C
E
D
F
G
Figure 4. Power feeder inventory.
A
B
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
Summary of Contents for G7873
Page 37: ......
