Model g5348/h0597/h0598 17 piece Air ratchet Kit
-5
-
otherwise, lubricate the impact wrench
daily with a 2–6 drops of pneumatic tool
oil directly into the tool's air inlet fitting, as
shown in
figure 3
, before and after each
use and every 2 hours of continued use.
figure 3.
Manual oiling.
figure 4.
ratchet controls.
the impact wrench requires 90 psi to
operate correctly. to improve air tool
lifespan, use a filter/lubricator/regulator
setup shown in
figure 2
.
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector
Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
figure 2.
installed filter lubricator
regulator.
air supply
daily maintenance
these procedures should be done after
each use:
•
Before putting the impact wrench away,
put 2-6 drops of oil into the air supply
fitting and momentarily operate the tool
to distribute the oil inside.
•
wipe the tool exterior and sockets with
a slightly oiled cloth. your goal is to
leave a light film of oil on the tool to
prevent rust.
controls
direction dial
trigger
