Model g4173
1
⁄
8
hp power Feeder
-15-
13. turn the horizontal crank to make sure that
the cover bolts are not too tight or too lose.
adjust the three cover hex bolts as required
to achieve a slight drag between the arm and
arm bracket.
14. lightly oil the t-handle threads shown in
Figure 12.
Note:
No lubrication is required for the arm
bracket and the elbow clamp connection.
15. position the arm bracket onto the elbow
clamp as shown in
Figure 13.
12. place the E-clip on the end of the horizontal
crank to retain the crank as shown in
Figure
11.
16. thread the t-handle into the elbow clamp
so both assemblies are secure as shown in
Figure 13.
17. Use the levers to lock the power feeder into
position, such as the example shown in
Figure 14.
Figure 13. arm bracket and elbow clamp
assembly.
Figure 11. horizontal crank handle E-clip.
E-Clip
Figure 12. arm bracket handle threads.
oil threads
Figure 14. typical power feed mounting using
an optional Model g4175 Quick holder.
Model g4175 Quick holder
