-2-
G4011 30" Sheet Metal Machine
Safety Instructions For Tools
13. MAINTAIN TOOLS WITH CARE.
Keep
tools sharp and clean for best and safest
performance. Follow instructions for lubri-
cating and changing accessories.
14. DISCONNECT TOOLS
before servicing
and changing accessories, such as blades,
bits, cutters, and the like.
15. USE RECOMMENDED ACCESSORIES.
Consult the owner’s manual for recom-
mended accessories. The use of improper
accessories may cause risk of injury.
16. CHECK DAMAGED PARTS.
Before further
use of the tool, a guard or other part that is
damaged should be carefully checked to
determine that it will operate properly and
perform its intended function. Check for
alignment of moving parts, binding of mov-
ing parts, breakage of parts, mounting, and
any other conditions that may affect its oper-
ation. A guard or other part that is damaged
should be properly repaired or replaced.
9
WEAR PROPER APPAREL.
Do not wear
loose clothing, gloves, neckties, rings,
bracelets, or other jewelry which may get
caught in moving parts. Non-slip footwear
is recommended. Wear protective hair
covering to contain long hair.
10. ALWAYS USE SAFETY GLASSES.
Also
use face or dust mask if cutting operation is
dusty. Everyday eyeglasses only have
impact resistant lenses, they are NOT safe-
ty glasses.
11. SECURE WORK.
Use clamps or a vise to
hold work when practical. It’s safer than
using your hand and frees both hands to
operate tool.
12. DON’T OVERREACH.
Keep proper footing
and balance at all times.
Operating this equipment has the potential
for flying debris to cause eye injury. Always
wear safety glasses or goggles when oper-
ating equipment. Everyday glasses or read-
ing glasses only have impact resistant lens-
es, they are not safety glasses. Be certain
the safety glasses you wear meet the
appropriate standards of the American
National Standards Institute (ANSI).
As with all tools, there is danger associated
with the Model G4011 30" Sheet Metal
Machine. Accidents are frequently caused
by lack of familiarity or failure to pay atten-
tion. Use this tool with respect and caution
to lessen the possibility of operator injury.
If normal safety precautions are overlooked
or ignored serious personal injury may
occur.
Summary of Contents for G4011
Page 10: ...9 G4011 30 Sheet Metal Machine...
