Model G1066R/Z/G1079R (Mfd. Since 02/11)
-37-
SECTION 6: MAINTENANCE
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning the Model G1066R/G1066Z/G1079R is
relatively easy. Vacuum excess wood chips and
sawdust, and wipe off the remaining dust with a
dry cloth. If any resin has built up, use a resin dis-
solving cleaner to remove it.
Cleaning
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To maintain a low risk of injury and proper
machine operation, if you ever observe any of the
items below, shut down the machine immediately
and fix the problem before continuing operations:
•
Worn or damaged sandpaper rolls.
•
Loose mounting bolts.
•
Any other unsafe condition.
Weekly Maintenance
•
Clean/vacuum dust buildup from underneath
top cover.
•
Clean/vacuum dust buildup from inside cabi-
net and off motor.
•
Lubricate pillow bearings.
Monthly Check
•
V-belt tension, damage, or wear.
Lubrication
Pillow Bearings
Lube Type ............. T26419 or NLGI#2 Equivalent
Lube Amount .....................................1–2 Pumps
Lube Frequency ....................................20 Hours
Item(s) Needed: ........................................... Qty
Grease Gun ....................................................... 1
Shop Rags ......................................... As Needed
The pillow bearings require a small amount of
grease every 20 hours of operation to ensure
smooth sanding drum rotation. The four pillow
bearings are lubricated by grease fittings (see
Figure 80). To lubricate pillow bearings, remove
grease fitting cap, use a grease gun to pump a
small amount of grease into fittings, then re-attach
cap.
Grease Fitting
(1 of 4)
Figure 80. Location of grease fittings.
Lubrication
