-12-
g1030 dust Collector
6. place the upper support bracket over the
lower support bracket, and secure with (4)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts, as shown in
figure
8.
Note:
The collector attaches to each sup-
port bracket. The inside of the collector is
funnel shaped and directs the air around in
a cyclone motion. Make sure that the inside
taper (funnel) is faced downward and the col-
lector inlet faces toward the collector body.
7. hook the top loop of the upper filter bags
(fabric) over the support brackets, as shown
in
figure 9.
figure 9. attaching upper filter bag.
8. tighten the upper bags to the collector using
the strap and clamp kits shown in
figure
10.
figure 8. Mounting collector to brackets.
Collector
upper support Bracket
lower
support
Bracket
5. attach the lower collector support brackets
to the top edge of the base plate using (4)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts, as shown in
figure
7.
figure 7. Mounting support bracket to base.
lower
support
Bracket
figure 10. upper collection bag secured.
Clamp
strap
