Grizzly G0885, Owner'S Manual

Page: 15 / 40

Model G0885 (Mfd. Since 04/19)
-13-
Bench Mounting
Figure 8. "Direct Mount" setup.
Machine Base
Workbench
Lag Screw
Flat Washer
Another option is a "direct mount" (see example
below) where the machine is secured directly to
the workbench with lag screws and washers.
The base of this machine has mounting holes
that allow it to be fastened to a workbench or
other mounting surface to prevent it from moving
during operation and causing accidental injury or
damage.
The strongest mounting option is a "Through
Mount" (see example below) where holes are
drilled all the way through the workbench—and
hex bolts, washers, and hex nuts are used to
secure the machine in place.
Machine Base
Workbench
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Figure 7. "Through Mount" setup.
Number of Mounting Holes ............................ 3
Diameter of Mounting Hardware Needed ..
1
⁄
4
"
Assembly
The G0885 work stop and base feet are the only
components requiring assembly.
To assemble machine:
1. Thread work stop rod with hex nut into vise
base (see
Figure 9).
2. Slide work stop onto work stop rod (see
Figure 9).
3. Insert hex bolt into work stop and thread work
stop lock handle onto hex bolt (see
Figure 9).
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
Figure 9. Work stop installed.
Work Stop
Work Stop Rod
with Hex Nut
Hex Bolt
Work Stop
Lock
Handle