Model G0835 (Mfd. Since 11/17)
-7-
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
Assembly
To assemble lathe:
1. Position stand legs upright approximately
37
3
⁄
4
" apart, and align them reasonably well
(see
Figure 3).
Figure 3. Stand legs aligned and correctly
positioned 37
3
⁄
4
" apart.
37
3
⁄
4
"
2. Follow Assembly Steps 2–20 in the G0799/
G0800 Owner's Manual to complete the
assembly process. Disregard
Steps 21–25,
as they do not apply.
Changing Speed
Ranges
The pulley belt configurations on this lathe provide
two speed ranges (see
Figure 4).
Note: To maximize spindle torque, use low spin-
dle speed range for spindle speeds of 1200 RPM
or less.
Refer to
Pages 35–36 in the G0799/G0800
Owner's Manual for all other information on
changing speed ranges.
Figure 4. Speed range belt positions.
Spindle
Motor
B
A
A
= Low Range
60-1200 RPM
B
= High Range
120-2300 RPM
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
