Grizzly G0784, Owner'S Manual

Page: 19 / 48

Model G0784 (Mfd. since 03/15)
-17-
DO NOT start machine until all preceding
setup instructions have been performed.
Operating an improperly set up machine
may result in malfunction or unexpect-
ed results that can lead to serious injury,
death, or machine/property damage.
Serious injury or death can result from
using this machine BEFORE understanding
its controls and related safety information.
DO NOT operate, or allow others to operate,
machine until the information is understood.
To test run machine:
1. Clear all setup tools away from machine.
2. Connect machine to power supply.
3. Rotate spindle switch to RIGHT position
to turn spindle ON. The motor should run
smoothly and without unusual problems or
noises.
4. Rotate spindle switch to STOP position to
turn spindle
OFF. Allow spindle to come to a
complete stop.
5. Turn spindle switch to LEFT position to turn
spindle
ON. The motor should run smoothly
and without unusual problems or noises.
6. Rotate spindle switch to STOP position to
turn spindle OFF. Allow spindle to come to a
complete stop.
Test Run
Once assembly is complete, test run the machine
to ensure it is properly connected to power and
safety components are functioning correctly.
If you find an unusual problem during the test run,
immediately stop the machine, disconnect it from
power, and fix the problem BEFORE operating the
machine again. The
Troubleshooting table in the
SERVICE section of this manual can help.