Model G0757 (Mfg. Since 6/13)
-27-
Ram Movement
The ram travels forward/backward 11" and rotates
180° on the turret.
Tools Needed
Qty
Wrench 15mm ................................................... 1
Wrench 24mm ................................................... 1
Moving Ram Forward/Backward
1. DISCONNECT MACHINE FROM POWER!
2. Loosen the two lock handles shown in
Figure 19.
Figure 19. Ram back-and-forth controls.
Lock Handles
Pinion Gear Bolt
3. Rotate pinion gear bolt to move ram until
spindle is in desired position.
4. Retighten lock handles to secure ram move-
ment vbefore resuming operation before
resuming operation.
Rotating Ram On Turret
1. DISCONNECT MACHINE FROM POWER!
2. Loosen the four hex nuts (two on each side
of the ram) that secure ram to turret (see
Figure 20).
Figure 20. Ram rotation hex nuts
(left side shown).
Hex Nuts
(2 of 4)
3. Make sure that cables and hoses are not
entangled or stretched as you move ram on
turret.
4. Retighten the four hex nuts that secure the
ram on turret before resuming operation.
Summary of Contents for G0757
Page 80: ...74 Model G0757 Mfg Since 6 13...
Page 84: ......
