Grizzly G0703HEP, Owner'S Manual

Page: 4 / 8

-4-
Model G0442HEP/G0601HEP (Mfd. Since 01/15) Model G0703HEP (Mfd. Since 01/15)
The HEPA cyclones are assembled largely the
same way as the regular cyclones but with the
HEPA filter components being installed in place of
the regular canister filter assembly. To assemble
your HEPA cyclone, open the
Assembly section
in the Owner's Manual and follow those steps only
when specified below.
Assembly
To assemble HEPA filter system:
1. Follow Assembly instruction Steps 1–7 in
owner's manual.
2. Install handle around cyclone funnel with (4)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (4)
5
⁄
16
" washers
(see Figure 1).
Figure 1. Dust collector assembled with handle
installed around cyclone funnel.
Handle
Cyclone
Funnel
Figure 3. G0703HEP HEPA filter system fully
installed.
6. Double-check that all nuts and bolts are tight-
ened. Congratulations, the install is complete.
Figure 2. HEPA filter assembly.
HEPA
Filter
Cage
HEPA
Filter
Housing
HEPA Filter
3. Follow Assembly instruction Steps 9–21 in
owner's manual.
4. Place HEPA filter inside HEPA filter cage.
5. Install HEPA filter assembly onto HEPA filter
housing with (8)
1
⁄
4
"-20 x
3
⁄
4
" hex bolts and (8)
1
⁄
4
" washers (see Figure 2).
Inventory
Hardware Bag ................................................... 1
—Hex Bolts
1
⁄
4
"-20 x
3
⁄
4
" .............................. 8
—Flat Washers
1
⁄
4
" ..................................... 8
—Foam Tape 5 x 50mm ............................ 1
The following is a list of additional components that
ship with the G0703HEP. Refer to the
Inventory
section in the
Owner's Manual for a complete
list of components shared by the HEPA and non-
HEPA models.