
g0659 9" x 14" Vertical Metal-Cutting Bandsaw
-21-
2.
place the stop clamp behind the saw frame
rest, as shown in
figure 27
.
figure 27.
saw frame locked forward.
stop Clamp
3.
slide the stop clamp forward against the saw
frame rest. Apply pressure to secure the saw
frame in the forward position, then tighten the
stop clamp knob.
saw Frame rest
To lock the blade in the forward position:
1.
remove the stop clamp, then release the saw
frame by lifting the saw release lever. Allow
the saw frame to move all the way forward,
as shown in
figure 26
.
figure 26.
saw frame moved forward.
saw release lever
stop Clamp
Locking Blade
4.
loosen the lock nut on the saw frame stop,
then turn the saw frame stop as needed to
position the blade as close to the vise as pos-
sible without touching it. this is the ideal saw
frame stop position.
5.
Without turning the saw frame stop, tighten
the lock nut.
Adjusting Saw
frame Stop
the saw frame stop controls the overall forward
movement of the saw frame. the proper setting
will ensure that the blade cuts completely through
the workpiece without cutting into the table or the
vise. Adjust the frame saw stop whenever the
blade is changed, fails to cut completely through
the workpiece, or contacts the vise.
To adjust the saw frame stop:
1.
Make sure the blade tracks properly and is
correctly tensioned.
2.
disConneCt BAndsAW FroM poWer!
3.
remove the stop clamp, turn both hydraulic
knobs on the control panel counterclockwise
to release the saw frame, then lift the saw
release lever to bring the saw frame all the
way forward. the saw frame will come to rest
on the saw frame stop (
figure 25
).
figure 25.
saw frame stop.
saw Frame stop
lock nut