Grizzly G0641, Owner'S Manual, Page: 20 / 56

-18-
G0641 Double Miter Saw
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Operational
Overview
The Model G0641 was designed to make two pre-
cise and matching 45° cuts in a high-production
shop. This is accomplished by using two opposing
12" saw blades and motors, with the blades rotat-
ing down through the workpiece in guillotine-type
movement.
The stock is positioned on the table up against
the fence and the adjustable stop. When the foot
pedal actuator is pressed, the pneumatic hold-
downs lower to hold the workpiece and the blades
swing down in a controlled manner to make the
cuts.
The resulting workpiece will have opposing 45°
cuts on the ends, and the triangular waste piece
exits the machine down through the waste chute.
The vertical movement of the clamping hold-
downs and saw blades is pneumatically controlled
and the rate can be independently adjusted.
To make a cut:
1. Position the hold-downs to firmly hold the
workpiece against the fence (
Page 19
).
2.
Adjust the lowering rates for the hold-downs
and saw blades ( Page 20 ).
3. Set the fence stop at the correct distance for
your operation (
Page 21
).
4.
Turn the saw
ON
, then press the foot pedal
actuator to make the cut.