background image

8DENG><=I?JAN!'%&'7N<G>OOAN>C9JHIG>6A!>C8#

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

 OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

7A&*&+.EG>CI:9>C8=>C6

Model G0453/G0454

***IMPORTANT UPDATE***

For Machines Mfg. Since August, 2012

and Owner's Manual Printed May, 2011 

The following changes were recently made to these machines since the owner's manual was print-
ed:

™

Cdl8H6XZgi^[^ZYidbZZi8H6''#',&#'"&%VcYJA.-,",i]hiVcYVgYh#

™

8]Vc\ZYi]Zbdidgcdb^cVakdaiV\ZheZXh[gdb''%Kid')%K#

™

6YYZYVeaj\idi]ZedlZgXdgY#

I]^hYdXjbZciegdk^YZhgZaZkVcijeYViZhidedgi^dchd[i]ZdlcZghbVcjVai]Vicdadc\ZgVeeanVcYVYY^"
i^dcVa ^c[dgbVi^dc gZfj^gZY Wn 8H6·Vh^YZ [gdb i]^h ^c[dgbVi^dc! Vaa di]Zg XdciZci ^c i]Z dlcZgh bVcjVa
Veea^ZhVcYBJHIWZgZVYVcYjcYZghiddY[dgndjgdlchV[Zin#

IMPORTANT: Keep this update with the 

owner's manual for future reference.

For questions or help, contact our Tech Support at (570) 546-9663 or [email protected].

Changed Specifications

Electrical

EdlZgGZfj^gZbZci######################################################################################')%K!H^c\aZ"E]VhZ!+%=o
8^gXj^iH^oZ<%)*(##########################################################################################################################'%6
8^gXj^iH^oZ<%)*)##########################################################################################################################(%6
>cXajYZYEaj\IneZ<%)*(#################################################################################################C:B6+"'%
>cXajYZYEaj\IneZ<%)*)###############################################################################################C:B6A+"(%

Motor

KdaiV\Z############################################################################################################################################')%K
6beh<%)*(###################################################################################################################################&*6
6beh<%)*)###################################################################################################################################&.6

Operation Info

8jiiZg]ZVYHeZZY################################################################################################################## )-%%GEB

READ THIS FIRST

Summary of Contents for G0453




















































































Reviews: