Grizzly G0440, Owner'S Manual

Page: 19 / 56

Model G0440/G0441 (Mfg. Since 03/12)
-17-
Before mounting, make sure you locate your dust
collector away from any open flames or potential
ignition sources, as fine dust can easily ignite.
If you are mounting your dust collector to a wood
framed wall, you must build and install the wall
mounting boards described below to support the
heavy weight of the dust collector.
If you are mounting your dust collector to a con-
crete or masonry wall, skip to
Page 18.
Materials Needed for Standard Wood
Framed Walls
• 2x12 Board 36" Long for Wall Mounting ..... 1
• 2x6 Board 36" Long for Wall Mounting ...... 1
• Level 4' ....................................................... 1
• Pencil .......................................................... 1
• Measuring Tape .......................................... 1
• Lag Bolts 3 ⁄
8
" x 5" (board/wall) .................. 16
• Flat Washers
3
⁄
8
" (board/wall) ................... 16
• Lag Bolts 1 ⁄
2
" x 2" (machine/board) ...........8*
• Flat Washers
1
⁄
2
" (machine/board) ............8*
• Drill ............................................................. 1
• Drill Bit
1
⁄
4
" (for
3
⁄
8
" predrill) .......................... 1
• Drill Bit 3 ⁄
8
" (for 1 ⁄
2
" predrill) ......................... 1
• Stud Finder ................................................. 1
*Two of these fastener sets will be used
in mounting the intake barrel brace dur-
ing assembly.
To mount the motor/impeller housing to a
wood framed wall:
1. Secure the wall mounting boards to your wall,
using the applicable layout diagrams for your
machine and wall type (see
Figures 5–6).
Wall Mounting
81
3
⁄
4
"
36"
3
1
⁄
2
"
3
1
⁄
2
"
12
1
⁄
2
"
Ground
Wall Stud Wall Stud Wall Stud
2x12 Board
2x6 Board
= Lag Bolts, Countersunk
= Lag Bolts
Wood Framed Walls, G0440
Figure 5. G0440 wall mounting board layout.
81
3
⁄
4
"
or
97
1
⁄
8
"
for
Double
Barrel
36"
12
1
⁄
2
"
Ground
Wall Stud Wall Stud Wall Stud
2x12 Board
2x6 Board
= Lag Bolts, Countersunk
= Lag Bolts
Wood Framed Walls, G0441
3
1
⁄
2
"
3
1
⁄
2
"
Figure 6. G0441 wall mounting board layout.