Grizzly ERM 1851 A Q-360, Translation Of The Original Instructions For Use

Page: 81 / 136

81
GB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does not
start
Power is off
Check the socket, cable, wire and
plug and have any repairs carried
out by an electrician
Safety bracket ( 2) or
release button ( 26)
defective
Repair by customer services
Worn carbon brushes
Defective motor
Grass too long
Set a greater cut height. Lift the
front wheels slightly by pressing
down on the handle bar.
Motor stops Blockage by foreign object Remove the foreign object
Result unsatisfactory
or motor labours
Cut height too low Set a higher cut height
Blade ( 29) blunt
Have the blade sharpened or re -
place it
Blade area blocked Clean the equipment
Blade ( 29) assembled
incorrectly
Install the blade correctly
Blade fails to turn
Blade ( 29) blocked by
grass
Remove the grass
Blade screw ( 30) loose Tighten the blade screw
Strange noises, rat -
tling or vibrations
Blade screw ( 30) loose Tighten the blade screw
Blade ( 29) damaged Replace the blade