Grizzly ERM 1434 G, Translation Of The Original Instructions For Use

Page: 26 / 140

GB
26
Storage
So the equipment takes up less
space, loosen the four wing nuts
and fold down the bow handle
and bottom bar. Make sure the
cables are not caught.
• Keep the equipment dry and out of
reach of children.
• Allow the motor to cool before storing
the equipment in a confined space.
• Do not cover the equipment with nylon
bags as moisture could build up.
We will not be liable for damages caused
by our equipment where these are caused
by improper repair or the use of non-
original parts or by use other than for the
intended purpose.
Waste disposal and envi-
ronmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in
an environmentally correct manner - bring
it to a waste disposal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines do not belong with do-
mestic waste.
• The plastic and metal parts employed
can be separated out and thus recy-
cled use can be implemented. Ask our
Service-Center for details.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.
• Defective units returned to us will be
disposed of for free.
Technical Specifications
Electric Lawnmower ...........ERM 1434 G
Motor input power .........................1400 W
Mains voltage ........ 220-240 V~, 50/60 Hz
Protection class ..................................II
Protection type ...................................IP24
Idling speed ..............................3500 min
-1
Cutting circle ....................................34 cm
Cut height ................................. 20-60 mm
Weight ...........................................12,5 kg
Lawn bag volume ................................35 l
Sound pressure specification
(L
pA
) ................................83 dB(A), K
pA
=3 dB
Noise level specification (L
wA
)
guaranteed .............................. 96 dB(A)
measured ............... 94 dB(A), K
wA
=2 dB
Vibration (a
n
) ................................ 1,4 m/s
2
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.