GB
59
Technical Specifications
Device
...........................ASF 3646 L-Lion
Motor voltage ...................... 36 V 3,0 Ah
Protection class .......................................III
Protection category ............................ IP21
Idling speed .............................. 2600 min
-1
Working width ..................................46 cm
Working height .................................27 cm
Adjustment range of the ejector
deflector
...............................................60°
Ejector chute slewing range ..............190°
Weight ...........................................19,5 kg
Sound pressure level
(L
pA
) .....................67,3 dB(A), K
pA
=3 dB(A)
Sound power level (L
wA
)
guaranteede .............................89 dB(A)
measured ... 86,1 dB(A), K
wA
=3,13 dB(A)
Vibration (a
n
) ......... 3,065 m/s
2
, K=1,5 m/s
2
Battery (Li-Ion) ...............................AP 36
Nominal voltage............................. 36 V
Capacity ...........................................3,0 Ah
Charging time ........................approx. 1,5 h
Recharger ................................... DYMA73
Voltage input ..........220-240 V~, 50 Hz, 1 A
Voltage output ......................... 36 V 2 A
Protection class ................................... II
Protection category ............................ IPX0
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
Warning
: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under actu-
al usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
