129
GB
Replacement parts
Spare parts and accessories
can be obtained at
www.grizzly-service.eu
If you do not have internet access, please
contact the Service Centre (see “Grizzly
Service-Center”).
Or obtain a 1.6 mm nylon string from a spe-
cialised dealer and wind it onto the spool
yourself. If you do, mind to use no more than
2 x 5 m of string and to wind it strictly parallel
along the two thread channels and against the
direction of motor rotation. The arrow on the
protective cover indicates the direction of mo-
tor rotation.
Technical data
Electric trimmer ........................ ERS 1238 S
Rated input voltage...................230 V~, 50 Hz
Power input......................................... 1200 W
Protection Class ........................................ II
Idling speed .................................... 6300 min
-1
Weight ................................................4.43 kg
Cutting circle dual line ........................380 mm
Line thickness dual line .......................1.6 mm
Sound power level
guaranteed (L
WA
)
................................
96 dB(A)
measured..................
92.4 dB(A); K
WA
=1.0 dB
Sound pressure level
(L
PA
)
..........................
79.4 dB(A); K
PA
= 1.0 dB
Vibration (a
h
)
...............1.95 m/s
2
; K
h
=1.5 m/s
2
Noise and vibration values have been de
-
termined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be under
-
taken in the course of further development
without notice. All dimensions, references
and information in this instruction manual are
therefore not guaranteed. Legal claims made
on the basis of the instruction manual can
therefore not be considered as valid.
The stated vibration emission value was
measured in accordance with a standard test-
ing procedure and may be used to compare
one power tool to another. The stated vibra
-
tion emission value may also be used for a
preliminary exposure assessment.
Warning
: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which the
power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage condi-
tions (all parts of the operating cycle
are to be considered, including, for
example, times during which the power
tool is turned off and times when the
tool is turned on but is running idle).
Summary of Contents for ERS 1238 S
Page 138: ...138 B 39370_20151007_gs...
Page 140: ......
